Product characteristics

The curing speed is fast, and it has excellent anti-seepage effect on the leakage backwater surface.

It has super permeability to concrete base surface and can react hydration with cement base material at the same time.

It can be constructed on wet foundation, with toughness and high bonding strength.

Excellent water resistance, simple construction technology and low labor intensity.

Application range

Roofing, kitchen and bathroom, subway, tunnel, swimming pool, reservoir, water tower, canal, bridge and so on, especially suitable for the repair of water leakage on the backwater surface.

Usage method: 

1. Base surface treatment: Waterproof base surface should be smooth without floating dust, oil pollution, and can be constructed on wet base surface, only without water (moisture content is less than 40%);

2. Mix ingredients: Paints A and B are mixed in barrels at a ratio of 4:1 and stirred for 5-10 minutes with a portable agitator to make them fully uniform.

3. It is suitable for brushing, rolling or spraying. It is coated more than three times, with an interval of 10-20 minutes. The thickness of the coating is more than 0.5mm, whichever is the dry of the hand contact.

4. The mixed coatings should be used up within 1 hour, otherwise the reaction of the coatings will be thickened and solidified sharply beyond the service time. The amount of preparation should be allocated according to the need to avoid waste caused by excessive allocation.

5. After coating construction, it can avoid being directly impacted by water flow within 24 hours. At room temperature, it reaches the maximum strength within 72 hours. It can enter the next working procedure, such as batching putty, sticking ceramic tile, etc.

Performance parameter 

Reference Dosage: 0.5-1.2kg/㎡

Initial setting time: ≤2hours

Final setting time: ≤72 hours

Construction temperature: +5℃~+35℃

Packaging: 2kgs/set  5kgs/set

Implementation standard: Enterprise standard,, specific indicators see technical parameters.

Transportation& Storage 

This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.

The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.

Under normal storage and transportation conditions, the storage period shall be at least 12 months from the date of production.

Attention

After the waterproof layer is completely dry, the construction can be carried out.

This material should be constructed in the environment of 5 - 35 C, and it is not suitable to be constructed outdoors in rainy weather.

If this product splashes into the eyes, it will be irritating. It should be washed with clean water in time.