Product characteristics 

The product can be uniformly coated on the basic layer twice without additional maintenance. The construction cost is low and the construction progress is fast.

The penetration depth can reach about 3 cm. The anti-penetration effect is good. After drying, it is colorless, transparent and hard, and does not change the color of the base surface.

It has good acid and alkali resistance and magic corrosion resistance, and can enhance the compressive strength of the surface of the structure.

Only the super aging resistance, the finished product performance is very stable, and the construction can be the same life as the concrete structure.

Application range

Leakage repair of walls and floors of bathrooms, bathrooms, balconies, basements, elevator wells, pools, fire pools, concrete foundations and other buildings (where there are obvious cracks, the leak stopper king should be used first to repair them).

Construction steps

1. Base Cleaning

Use detergents to clean the walls and floors as much as possible and dry them with dry cloth. The base surface should be clean, dust-free, oil-free and strong.

2. Brushing

The transparent glue should be painted on the wall and floor with a wool crane, so as to avoid leakage; the second time should be painted vertically same with the first time, usually two times, and if necessary, three times. It can also be constructed by spraying and roll coating.

Implementation standard: JCc/T1018-2006，specific indicators see technical parameters.