"Taishi Star" transparent waterproofing adhesive is a prescription technology and production equipment imported from Germany by Taishi Company at a huge cost. All products are refined from imported raw materials. The utility model has the characteristics of wide use, convenient use, excellent performance, and service life of more than 20 years.
Product characteristics
The product is colorless, transparent, no yellowing and no sticky dust after painting, and it combines perfectly with the original base surface after film forming.
After film forming, the product is ageing resistant, ultraviolet resistant, acid and alkali resistant, high and low temperature resistant.
After film forming, the product has high elongation, high tensile strength, strong bonding force, and tough and wear-resistant coating.
The product is easy to construct, safe to operate, and can be painted by spraying, brushing, roll coating, etc.
Environmental protection of products: non-toxic, VOC emissions meet environmental protection standards, belong to environmental protection products.
Application range
I. Leakage Repair of Wall and Floor of Bathroom, Kitchen and Balcony and Other Buildings.
II. It can be used in waterproofing layers of various building materials (waterproofing rolls, waterproofing coatings), surface protective layers of coatings, such as high-speed waterproofing, color steel tile waterproofing, glazed tile waterproofing, etc.
Usage method:
1. Base Cleaning: Use detergent to clean the wall and floor as far as possible, and wipe it thoroughly with dry cloth. Base surface should be dry, dust-free, oil-free and surface firm.
2.Mix ingredients: According to the proportions provided by the company, group A: group B = 2:1 (or the proportions provided by the manufacturer), the proportions should not be changed, and material B should be poured into material A for full mixing and then used up in 20 minutes.
3. Brushing: Use a brush to paint the transparent glue on the wall and the ground. When brushing, you should be very careful to avoid leakage of brushing. The second brushing should be done vertically with the first brushing, usually twice. If necessary, you can brush three times. It can also be constructed by spraying and roll coating.
4. Maintenance: Before the coating is completely dry (about 24 hours), it should not be trampled, contacted with open water or scratched.
Performance parameter
No | Project | Performance index comparison | |
Taishi Star Index | Polyurethane waterproof coating | ||
1 | Solid content | ≥85% | ≥45% |
2 | Fracture elongation | ≥300% | ≥300% |
3 | Tensile strength | ≥5Mpa | ≥1Mpa |
4 | Tear strength(KN/m) | Do not fade, do not fall off | Yellowing, peeling |
5 | Wear resistance(750g/500r) | ≥0.3 Mpa 30 min no leakage | No, it breaks when friction |
6 | Water resistance(30d) | No blistering, no peeling | Blistering |
7 | Bond strength | ≥4Mpa(Destruction of substrate) | ≥2Mpa |
8 | Low temperature bending(-40℃) | No significant change in performance | Embrittlement |
Transportation& Storage
This product is non-flammable and explosive material, which can be transported according to general cargo. Sunscreen, freeze-proof, rain-proof, extrusion and collision should be avoided in transportation, and the packaging should be kept intact.
The product should be ventilated, dried and prevented from direct sunshine during storage. The storage temperature should be between 5 to 35℃.
Under normal storage and transportation conditions, the storage period is 12 months from the date of production.
Attention
After the waterproof layer is completely dry, the overburden construction can be carried out.
This material should be constructed in the environment of 5 - 35℃, and it is not suitable to be constructed outdoors in rainy weather.
It is strictly forbidden to mix the dried slurry with water for reuse.
This product is alkaline, if splashed into the eyes will be irritating, should be washed with clear water in time.
24 hours Hotline