logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-106A Hardcover kitchen and toilet (blue sky)

TS-106A Hardcover kitchen and toilet (blue sky) waterproof coating, composed of high performance polymer emulsion and a variety of inorganic materials, made of two component waterproofing slurry. It can cover tiny cracks and resist slight vibration.

 

Order Hotline:400-6352-668

Product characteristics 

It can be constructed on wet, complex and rough foundation.

After dry consolidation, tiles can be directly pasted or plastered to leveling.

Non-toxic and harmless, it can be directly used in drinking water ponds and fish ponds.

The coating can inhibit the growth of mould and prevent the pollution of moisture and salt on the decorative surface.

 

Scope of application

Applicable to home kitchen, bathroom, shower, wardrobe, decorative wall, background wall, ceiling base, moisture-proof base, etc.

 

Usage method 

1. Base treatment: The base should have a solid surface structure with porous, rough, crackless, clear water and no empty drum, and the uneven base should be leveled first.

2. Preparation: first, the B component (emulsion) is poured into a clean container, then the A component (powder) is poured into the emulsion, and the electric mixer is used to stir until uniform without caking. Let the slurry rest for 2 to 4 minutes before stirring again.

3. Construction: Brush or spatula is used to coat at least two layers by cross-over method. The first layer is coated with thick coating so that there is no void at all on the base surface. When the first coat has solidified and produced enough strength, about 2 to 4 hours later, the next coat can be constructed. The total coating thickness should be at least 1.0 mm or more. If necessary, the third floor construction can be carried out.

be

sPerformance parameter 

Reference Dosage:1.5-2.0kgs/

Initial setting time: ≥45min

Final setting time: ≤24hours

Construction temperature: +5℃~+35℃

Packaging: 5kgs/set  17.2kgs/set 

Implementation standard: JC/T 984-2011(II), specific indicators see technical parameters.

No

Project

Technical   standard(II)

1

Setting time

Initial   setting time/min   ≥

45

Final   setting time/h     ≤

24

2

Impermeability pressure/Mpa

Coated specimen≥

7d

0.5

Mortar specimen ≥

7d

1

28d

1.5

3

Compressive strength/Mpa    ≥

24

4

Flexural strength/Mpa           ≥

8

5

Flexibility (transverse   deformation capacity)/mm  ≥

1

6

Bond strength/Mpa   ≥

7d

1

28d

1.2

7

Alkali resistance

No   cracking, peeling

8

Heat resistance

No   cracking, peeling

9

Frost resistance

No   cracking, peeling

10

Shrinkage rate/%    ≤

0.15

11

Water absorption rate/%  ≤

4

 

 

Transportation & storage

This product is non-flammable and explosive material, which can be transported according to general cargo. Sunscreen, freeze-proof, rain-proof, extrusion and collision should be avoided in transportation, and the packaging should be kept intact.

The product should be ventilated, dried and prevented from direct sunshine during storage. The storage temperature should be between 5 and 35.

Under normal storage and transportation conditions, the storage period is 12 months from the date of production.

 

Attention 

After the waterproof layer is completely dry, the overburden construction can be carried out.

This material should be constructed in the environment of +5 - +35, and it is not suitable to be constructed outdoors in rainy weather.

It is strictly forbidden to mix the dried slurry with water for reuse.

This product is alkaline, if splashed into eyes will be irritating, should be washed with clear water in time.

TS-106a精裝廚衛(藍(lán)天)-17.2kg(19l桶).jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x