logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-301 Base Surface Reinforcement Agent -5KG

TS-301 is made up of selected polymer emulsion and auxiliaries. It can be used as wall putty scraping, water proofing coating and ceramic tile paving interface to enhance the cohesive force of putty, waterproofing slurry and low water absorption ceramic tiles. It can also be used as an additive for mortar plastering to improve the flexibility, water resistance and cohesive force of mortar.

Packaging Label: Easy to Paint, Economical, Strong Viscosity, Multifunctional

Order Hotline:400-6352-668

Product performance 

Excellent construction performance, higher viscosity, easy to brush, healthy and environmental protection;

Moisture-proof, water-proof and durable performance;

It has a wide range of applications, such as enclosure, reinforcement, napping and reinforcement. A bucket can meet all kinds of needs.

 

Application range

It is suitable for the interface treatment of cement mortar, concrete, light block and other substrates.

As the interface treatment agent before cement plastering and repairing mortar, it can reduce the water absorption of the base surface and increase the bonding force between the base surface and the plastering layer.

Combining with mortar plastering layers of different thicknesses can increase the flexibility, water resistance and bonding strength of the products.

 

Usage method

Open the bucket, directly brush the base, wall or tile back for reinforcement. It can also be used as additive of cement mortar plastering layer according to the ratio of interface agent:cement = 1:2, electric stirring and mixing.

 

Transportation& Storage 

This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.

The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.

Under normal storage and transportation conditions, the storage period is12 months from the date of production.

 

Attention

If the product touches the skin wash it with clean water. If enter eyes carelessly, wash it with clean water immediately and see a doctor in time.

 

Performance parameter 

Reference Dosage: 0.5-2kg/

Initial setting time: ≤45min

Final setting time: ≤24hours

Construction temperature: +5℃~+35℃

Packaging: 5kgs/bucket  18kgs/bucket

Implementation standard: JC/T 907-2002, specific indicators see technical parameters.

Project

Index


Type I

Type II

Shear bond strength/Mpa

7d

≥1.0

≥0.7

14d

≥1.5

≥1.0

Tensile bond strength/Mpa

Untreated

7d

≥0.4

≥0.3

14d

≥0.6

≥0.5

Soaking treatment

≥0.5

≥0.3

Heat treatment

Freeze-thaw Cycle Treatment

Alkali treatment

Airing time/20min

--

≥10

The airing time of type I is   determined by both suppliers and buyers according to the engineering   requirements.

 

TS-301 基面加固-5kg(5L桶).jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x