logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-405 Exterior Wall Transparent Waterproof Adhesive

TS-405 external wall transparent waterproof adhesive is a high-tech product for the leakage of external walls. It is made of high-performance latex exterior wall waterproof adhesive through nano technology. The product is non-toxic, tasteless and pollution-free. It is a green environmental protection product, transparent with conjunctiva after waterproof coating, keeps the original appearance of the building, has good impervious and waterproof properties, and has excellent aging resistance.

 


Order Hotline:400-6352-668

Product characteristics 

Water-borne latex is a healthy environmental protection product with good waterproofing effect and safer use.

Cold construction, simple operation, convenience, safety, good water resistance;

The film has high elasticity, good crack resistance, high bonding strength, excellent anti-ultraviolet, heat insulation and weather resistance; the film is colorless and transparent after drying.

 

Application range

Leak-proof treatment of exterior wall surface of various new buildings; repair of damaged exterior wall surface of complex materials such as old building tile, stone, water brush stone, etc.

 

Usage method: 

1. Base surface treatment: first, clean the construction base surface to no oil pollution, achieve solid and smooth, without crispness, sand, peeling and other phenomena, cracks should be repaired and smoothed first;

 

2. Brushing: It is advisable to test the moisture content of the base surface about 40%. The construction can be carried out by brushing, rolling and spraying methods. The waterproof collagen liquid and water can be diluted proportionally or the first base coating can be painted by brushing. If the ceramic tile or stone surface is finished by brushing carefully, the gap in the seam can be filled by infiltration crystalline waterproof coating and water into paste.

3. Repeated brushing: spraying or rolling the whole again for the second and third time. During multiple times of construction, before the first coating is dry, the next coating can be carried out. After long-term immersion, the film must be completely dried before water can be stored. The complete drying time is 48 hours, and the humid environment should be prolonged appropriately.

 

Performance parameter 

Reference Dosage: 0.2-0.5kg/

Initial setting time: ≤2hours

Final setting time: ≤24 hours

Construction temperature: +5℃~+35℃

Packaging: 1kg/bottle   4.5kgs/bucket    16kgs/bucket

Implementation standard: Enterprise standard, specific indicators see technical parameters.

No

Project

Index

1

Appearance

transparent viscous liquid

2

Surface dry time

1h

3

Fracture elongation

≥400%

4

Tensile strength

≥0.8Mpa

5

Low temperature flexibility

-20℃   no crack

6

Heat resistance

80 5h no change

7

Cold-hot cycle

No cracking, discoloration, gloss loss and peeling   of coatings

8

Impermeability

0.3 Mpa, in 30min no leakage

9

Bond strength

≥1.0Mpa

 

 

Transportation& Storage 

This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.

The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.

Under normal storage and transportation conditions, the storage period shall be at least 12 months from the date of production.

 

Attention

After the waterproof layer is completely dry, the construction can be carried out.

This material should be constructed in the environment of 5 - 35 C, and it is not suitable to be constructed outdoors in rainy weather.

If this product splashes into the eyes, it will be irritating. It should be washed with clean water in time.

TS-405 外(wài)牆透明防水膠-4.5kg(5L桶).jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x