logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-403A Water-soluble grouting material

TS-403A water-soluble grouting material is a single-component polymer water-proof and leak-stopping material formed by chemical reaction between isocyanate and water-soluble polyether.

Order Hotline:400-6352-668

Product characteristics

Water is used as cross-linking agent to disperse, emulsify and foam on its own after encountering water in order to achieve instantaneous water stop.

Single liquid grouting has low viscosity, good grouting performance and large water entrapment ratio.

The consolidates have good extensibility, elasticity and impermeability.

The material expands and foams in the presence of water, which has the characteristics of secondary permeation and no pollution to water quality.

 

Application range

It is suitable for seepage prevention and leak stoppage in various parts of underground buildings, water pools, water towers, etc.

It is suitable for blocking leakage of deformation joints, construction joints and settlement joints in buildings, subway and tunnel projects.

It is suitable for crack plugging of piers, dams and Hydro-power stations, and for places with large water leakage.

 

Usage method: 

1. Construction preparation: enlarge the joint of the leaking part, chisel into "V" type, and clean up.

2. Leakage point treatment: embedding diversion pipe and grouting nozzle in "V" groove and sealing with fast hardening and micro-expansion cement;

3. Leakage stoppage construction: pressure grouting with grouting machine, after filling, the grouting pipe is immediately tied (general pressure control is about 0.2-0.3 Mpa);

1. Clean up the site: The exposed grouting nozzle can be removed the next day, and the surface can be restored with cement mortar.

 

Performance parameter

Reference Dosage: According to the actual site dosage

Initial setting time: ≤150seconds

Final setting time: ≤12 hours

Construction temperature: +5℃~+35℃

Packaging: 10kgs/bucket

Implementation standard: JC/T 2041-2010WPU, specific indicators see technical parameters.

No

Project

Index

1

Appearance

No impurities, no gel

2

Density/(g/)      ≥

1

3

Viscosity    mPa.s   ≤

1.0x10³

4

Gel time /S           ≤

150

5

Setting time          ≤

---

6

Water swelling rate/%  ≥

20

7

Inclusion water (10 times water)/s ≤

200

8

Nonvolatile content/%     ≥

75

9

Foaming rate/%        ≥

350

10

Compressive strength/Mpa    ≥

---

 

Transportation& Storage 

When storing and transporting, different products should be classified and stacked. It is forbidden to approach fire source, avoid sunshine and rain, and prevent collision.

The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.

Under normal storage and transportation conditions, the storage period shall be at least 12 months from the date of production.

 

Attention

The product reacts upon meet water, please pay attention to the use amount of open cover.

This product will irritate the skin, please do a good job of safety protection before construction.

This product will be irritating if it splashes into the eyes. Do not rinse it with water. If it is uncomfortable, please see a doctor in time.

 

TS-403A 水溶性灌漿料10kg-桶.jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x