What is concrete sealing and curing agent? Through effective penetration of 5-8mm, compounds penetrated into concrete and semi-hydrated cement, free calcium, silica and other substances contained in concrete have undergone a series of complex chemical reactions to produce hard substances, which will eventually increase the compactness of concrete surface, thereby improving the strength, hardness and hardness of concrete surface. Wear resistance, impermeability and other indicators.
How does it work? Complex chemical reaction end products will plug and seal the structural pore of concrete. The increase of strength will bring about the improvement of surface hardness, and the improvement of compactness will bring about the improvement of impermeability. Reducing the path of water flow, means reducing the invasion of harmful substances, greatly enhances the corrosion resistance of concrete to chemical substances. Therefore, concrete sealing and curing agent can bring long-term sealing, strong, wear-resistant, dust-free concrete surface.
Application Range
It is suitable for diamond abrasion-resistant floor, terrazzo floor, raw pulp sunshine floor, ultra-flat floor, ordinary cement floor and other base surfaces. It is suitable for factories, warehouses, supermarkets, wharfs, Airport runways, bridges, highways and other places with water-bearing mud foundation.
Product performance
Dust-proof sealing, hardening and wear-resisting.
Inhibits the erosion of chemicals.
Permanent gloss (with the passage of time, the treated concrete floor will have a fascinating wax-like gloss).
Good weathering resistance.
The construction is convenient and the process is environmentally friendly (colorless and tasteless).
Reduce maintenance costs, one construction, permanent protection.
System characteristic
In the long-term use process, it gradually produces gloss.
The general service life is 15-20 years.
Construction profile
Concrete Sealing &Curing Agent
Reflecting of raw concrete slurry
Diamond abrasion resistant or terrazzo floor
Construction technology
Specific practices and requirements |
1: A 300 mesh epoxy resin professional grinder is used for comprehensive grinding (which can be wet treated with clean water) and leaks out the clean and fresh surface of the concrete. Purpose: to remove the original ground rubbish, dust and pulp, open more fine pore in the original ground, so as to facilitate more and better infiltration of sealing and curing agent into the ground. |
2:Use”Taishi” brand sealing&curing agent uniformly sprayed on the surface after grinding (amount per square 0.4-0.5KG) to keep the ground moist time is 40 minutes to an hour later, when the surface becomes sticky, clean the whole surface, then clean up all the water, natural drying for more than 24 hours. Purpose: in order to concrete sealing& curing agent into the ground more deeply, more adequate reaction, time control should be based on the ground absorption rate of the ground. |
3:After the ground is completely dried, the ground polishing is carried out. Firstly, 500 mesh epoxy resin professional grinder is used to grind the ground completely for 2-3 times. |
4: Then use 1000-2000 professional epoxy resin grinder to finish 2-3 times and polish the whole base surface. |
5: Use professional floor washing equipment to clean the floor |
24 hours Hotline