logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TSD207 Micro-bead anti-skid floor paint

TSD207 micro-bead anti-skid floor paint is a kind of bi-component high performance thin-coated epoxy floor paint, which is composed of epoxy resin, modified amine curing agent and imported spherical grave filler. Because of the stress concentration of the spherical glume, filling in the material can overcome the appearance of destructive cracks. At the same time, the spherical surface is more conducive to the uniform transmission of external forces to the surrounding matrix, thus improving the mechanical properties of the material, greatly improving its wear resistance, and has a very good anti-skid effect.

Order Hotline:400-6352-668

Application Range

Supermarket, building hall, warehouse, automobile exhibition hall, automobile repair shop, parking lot and other special places with anti-skid requirements.

Areas requiring high mechanical properties, the ground with a certain impact force, such as the machinery, electronics, electrical appliances, instrumentation, medicine, textiles, clothing, food, tobacco and other enterprise factories.

 

Product performance

The surface particles have uniform fineness, small fluctuation, high resistance and good anti-skid performance.

Reasonable structure, smooth, comfortable, no vibration, low noise, beautiful and slippery

Compression resistance, wear resistance, impact resistance and long service life

It has strong bond with the base layer, seamless surface and is not easy to peel off or crack.

Good drainage performance, no pollution, reduce or even eliminate splashes and water film, driving safety in rainy days.

 

Technical standard

Inspection items

Index value

State in Container

After mixing, there is no hard block,in a uniform   state

Coating appearance

Flatness, no brush marks, wrinkles, pinholes,   bubbles and other defects.

Drying time(H25)

Surface dry

≤4

Actual dry

≤24

Pencil hardness/H

≥3

Adhesion/Class

≤1

Skid resistance

≥0.5

Impact resistance,Ø50mm, 500g steel ball, height   100m

No cracks, peeling off of the coating

Wear resistance(750g/500r)/g

≤0.0030

Tensile bond strength 7d standard condition/M Pa

≥0.5

Water resistance

No blistering, no peeling, allowed slight   discoloration,

restored after 2h.

 

Chemical resistance

15% Na OH solution 72h

No blistering, no peeling, allowed slight   discoloration

 

10% HCL solution 72h

No blistering, no peeling, allowed slight   discoloration

120% Solvent gasoline 72h

No blistering, no peeling, allowed slight   discoloration

 






System characteristic

Overall thickness: 1-5 mm.

The service life is 8-10 years.

No need to add sand on site

 

Construction profile

1 time anti-skid micro-bead surface layer

1 time common surface layer

2 times putty layer

1 time medium-coated mortar layer

1 time primer layer

Basic ground

 

Construction technology

Process name

Specific practices and requirements

Reference dosage

Primer layer

Mix the material proportionally and mix evenly   with agitator. Use professional drum to coat evenly and without omission.

0.15-0.2kg/

Mortar layer

Mix the paint and curing agent evenly according to   the prescribed proportion (weight ratio), slowly add the appropriate amount   of quartz sand, use a professional flat knife for batch scraping.

 

0.7kg//mm

Putty layer

After mixing the paint and curing agent in the   prescribed proportion (weight ratio) and mixing evenly, add appropriate   amount of quartz sand slowly, and scrape it in batches with a flat knife in a   limited construction time.

0.2-0.3kg/

Surface layer

1:Use epoxy surface paint , mix the main paint and   curing agent proportionally,mix evenly.

2:Dip the paint on the prepared drum and roll it   evenly. It is required that the coating be uniform and leak-free. Roll it   twice or spray 1-2 times.

 

0.25-0.3kg/

Micro-bead anti-skid surface layer

After the putty layer is solidified, the main   material of the anti-skid micro-bead topcoat is stirred evenly, and then the   curing agent is added into the paint barrel to mix evenly. After that, it is   evenly brushed once with a professional drum to achieve uniform surface   particle fineness.

 

 

0.1kg/

20181009121217502 (1).jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x