logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TSD206 Epoxy FRP anti-corrosive floor paint

With the rapid development of economy, China's demand for petroleum and petrochemical products is increasing. From the transportation to storage transfer of crude oil and natural gas; From pipeline transportation and refining to product oil storage, it is necessary to build steel structure devices such as storage and irrigation, pipeline, production line, etc., which all need anti-corrosive floor coating.

Order Hotline:400-6352-668

Application Range

The long-term anti-corrosion of light industrial products, storage tanks, marine equipment, transportation pipelines, electroplating, electrolyzer and other aspects requires strengthening the mechanical strength of the cement floor or the surface of the drainage ditches and alkali pools.

 

Product performance

Strong acid and alkali resistance

Bonding strength and tensile crack resistance

Increasing thermal modification temperature and reducing temperature impact strength.

In particular, it can improve the strength and elasticity of the matrix.

 

Technical standard

Inspection items

Index value

State in Container

After mixing, there is no hard block,in a uniform   state

Coating appearance

Flatness, no brush marks, wrinkles, pinholes,   bubbles and other defects.

Drying time(H25)

Surface dry

≤4

Actual dry

≤24

Pencil hardness/H

≥3

Adhesion/Class

≤1

Skid resistance

≥0.5

Impact resistance,Ø50mm, 500g steel ball, height   100m

No cracks, peeling off of the coating

Wear resistance(750g/500r)/g

≤0.0030

Tensile bond strength 7d standard condition/M Pa

≥0.5

Water resistance

No blistering, no peeling, allowed slight   discoloration,

restored after 2h.

 

Chemical resistance

15% NaOH solution 72h

No blistering, no peeling, allowed slight discoloration,

10% HCL solution 72h

No blistering, no peeling, allowed slight   discoloration,

120% Solvent gasoline 72h

No blistering, no peeling, allowed slight   discoloration,





 

System characteristic

Surface morphology: solid color, bright light

Overall thickness: 1-3 mm

General service life is 3-5 years


Construction profile

Anti-corrosive surface layer

Anti-corrosive Putty layer

Anti-corrosive Mortar layer

Tensile Glass Fiber Cloth

Anti-corrosive primer layer

Basic ground

 

 

Construction technology

Process name

Specific practices and requirements

Reference dosage

Primer layer

1:Use epoxy water-borne primer, mix the main paint   and curing agent proportionally, mix evenly.

2:Roll the coating with a roller to be uniform, no   leakage.

3:Use a brush to brush the side of the door, the   corner of the wall, under-chassis, etc

0.15-0.2kg/

Glass Fiber Cloth

Lay the glass fiber cloth, pour the epoxy resin   and curing agent on the bovine cloth, and scrape it flat with a scraper.


Mortar layer

1:Use epoxy water-borne primer, mix the main paint   and curing agent proportionally and add 40-150 mesh quartz sand to mix   evenly.

2:Scrape 1-3 times with batch knife.

3:After solidification, grind the defect such as   knife marks and clean them up.

0.6kg//mm

Putty layer

1: Use epoxy water-borne medium paint, mix the main paint and   curing agent proportionally and add appropriate fillers (such as quartz   powder, talc powder) to mix evenly.

2: Scrape 1-2 times with batches of knives, with   emphasis on filling holes in the ground.

3: After solidification, grind the defect such as   knife marks and clean them up.

0.2-0.3kg/

Surface layer

1:Use anti-corrosive epoxy surface paint, mix the   main paint and curing agent proportionally,mix evenly,add water to suitable   construction viscosity.

2:Dip the paint on the prepared drum and roll it   evenly. It is required that the coating be uniform and leak-free. Roll it   twice or spray 1-2 times.

 

0.25-0.3kg/

20181009121217502 (1).jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x