Using imported 828 resin or 128 resin, BYK additive and American gas curing agent as raw materials, refined by advanced technology, it is a high solid content, low viscosity, high transparency, two-component high-power mortar coating material with good flowability and excellent mechanical strength.
Application Range
Coatings in flooring systems other than anti-static, anti-corrosion and water-based flooring. It can be used to repair local irregularities or cracks.
Instructions
1. Epoxy resin universal primer is bi-component primer, the ratio is the main agent: curing agent = 5:1, mixing well before coating, complex additive material weight ratio 30% filler
2.In construction, the ambient temperature should be 10-35 ℃, and the humidity should be less than 80%.
3. The use time of the materials after deployment: within 30 minutes.
4. Construction method: Uniform scraping with flat knife can improve the compressive strength and wear resistance of the floor system.
5. Construction methods: spraying, or using medium wool drum coating, long wool drum coating is too thick, easy to produce drum marks, short wool drum coating adhesive insufficient, easy to leak coating.
6. Shelf life: 6 months
Technical standard
Inspection items | Index value | |
State in Container | After mixing, there is no hard block. | |
Drying time(H25℃) | Surface dry | ≤4 |
Actual dry | ≤24 | |
Alkali resistance(48h) | Paint film integrity, no blistering, no peeling, allowed slight discoloration | |
Adhesion/Class | ≤1 | |
Types and Packaging
TS-103 General Medium Coating: main agent 17.5kgs, curing agent 3.5kgs
High-end wear-resistant medium coating: main agent 20kgs, curing agent 4kgs
TS-104 Solvent-free medium coating: main agent 20kgs, curing agent 4kgs
Product performance
The general epoxy coating material can be used to mix quartz sand or quartz powder, which can improve the hardness and smoothness of the ground. It can form a thick mortar layer at one time and has excellent mechanical overload strength.
24 hours Hotline