logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-11 High Permeability Modified Epoxy Resin Grouting Paint

Product overview

TS-11 high permeability modified epoxy resin grouting paint is a double component filling material made from epoxy resin as the main agent, with plasticizer, accelerator and curing agent. According to its use environment and product performance, it can be divided into 3 types: I, II and III. Type I is high permeable dry and wet curing grouting material, II type is underwater curing slow plugging grouting material, III type is underwater solidified quick plugging grouting material.

 

Order Hotline:400-6352-668

Advantages

* The viscosity is low, the irrigability is good, and the permeability to small cracks is strong.

* High strength and high adhesion, small shrinkage, greenhouse curing, stable chemical properties.

* It has the function of reinforcing and strengthening, blocking leakage and anticorrosion, and has the function of repairing broken concrete beams and columns.

* It has the characteristics of dry and wet solidification, underwater solidification, and does not pollute the underground water.

* The mechanical property is stable, the durability is good, can bond the underwater loose orthopaedics or the fault, enhances the concrete or the fault label.

 

 Model and specification

* Model: I, II and III

* Packing: 10kgs/bucket

 

 Application Range

* Reinforce for beams, columns, slab cracks, honeycombs, runways, etc.

* Underground buildings, tunnels, geological faults, mines, military tunnels, dykes, wharves, bomb shelters, empty drums of subway tracks, comprehensive pipe corridors, island and reef leakage and reinforcement.

* Sealing and anticorrosion of Subway segments, underground pipelines, water transmission pipes and sewage pipes.

* Concrete interfacial agent, bottom coating, shield section anticorrosion

* Improving the strength of concrete base surface of road, bridge, ground and so on by coating construction.

 

Executive Standard JC/T1041-2007

 

 Key points of construction

* The specific ratio of modified epoxy resin and curing agent is in accordance with the qualification certificate instruction, and the curing agent is poured into the modified epoxy resin and stir evenly.

* Clean the base area and install the grouting nozzle with epoxy paste to stop the seams

* The high pressure rubber pipe is set on the grouting nozzle, fastened, grouting pump is used for pressure grouting, when the slurry is full, the high pressure rubber pipe is sealed with wire to check the seepage, if necessary can carry on the second sweep hole grouting to ensure the full permeability and consolidation of the slurry.

* After the slurry solidifies, the exposed grouting nozzles can be cut off and silt leveled.

* Ventilation during construction and timely cleaning of leaking liquid.

 

Storage & Packaging

* The product should be stored in a cool and ventilated place, avoid sun, prevent approaching fire sources, the storage period is 12 months from the date of production.

*  If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection.

TS-11 高滲透改性環氧樹(shù)脂灌漿液塗料-3個組合.jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x