logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-906 Spraying Rapid Setting Rubber Asphalt Waterproofing Paint

Product overview

Spraying rapid setting rubber asphalt waterproofing paint is a kind of high solid content, water-friendly, super-elastic asphalt-based polymer waterproof coating. It can be sprayed at room temperature and formed instantaneously. It is easy to construct and has strong adhesion.

Order Hotline:400-6352-668

Advantages

* Ultra high elasticity: the elongation of the elastic coating is over 1000% and the recovery rate is over 90%. It can effectively solve the problems of leakage and rust caused by the stress and deformation of the buildings, the expansion and cracking, the puncture or the unfastened connection.

* Perfect coating: the coating can cover the base surface perfectly, realize the seamless connection between the coating and the base surface, and achieve the characteristics of no water channeling and no stripping which is difficult for the coiled material. For the special-shaped structure or the complex base, the construction is more simple and reliable, and the "skin type" waterproof layer is formed.

* Chemical properties: excellent chemical corrosion resistance, acid and alkali resistance, salt resistance, especially suitable for chemical industry, sewage treatment industry tanks and structures.

* Temperature tolerance: low tenderness can be as low as -40, suitable for waterproofing in high and cold areas, high temperature up to 160, suitable for road and bridge waterproofing works.

* Ageing resistance: through UV and manual accelerated aging 720 hours test, equivalent to outdoor burst 40 years.

* High construction efficiency: spray instant molding, you can carry out the next process. Professional spraying machinery is used to shorten the construction period and save cost. A spraying equipment can connect 2 spray guns, the daily construction capacity is more than 1500.

* Excellent adhesion: bonding to concrete, wood, metal, glass and other materials , the adhesion of no layer, do not peel off , do not fall off, with a good connection effect

* Flexible coating methods: can be sprayed, brush and scratch coating, flexible and simple. Meet the special requirements of waterproofing in different environments, such as: sink, yin-yang angle, construction joint, structure crack prevention and so on.

* Can be constructed on wet surface: can be constructed on the wet base, easy to be used in subway, tunnel, water conservancy and other engineering fields

* Various functions: perfect peritoneum is formed in the base. Besides excellent waterproof performance, it also has many functions, such as anticorrosion, protection, shock absorption, noise resistance and so on.

* Water, environmental protection, energy saving: as a new generation of environmental protection and energy saving water materials, in the production, construction and use of the process, no use of organic solvents, cold refrigeration spray, non-toxic and tasteless, no waste emissions, no pollution. During the whole construction process, no need heating and normal temperature operation, and there is no open fire, which ensures the safety and reliability of the construction.

 

 

Executive Standard  Q/GZTS 2-2017

 
 Application Range

Products have been widely used in industrial and civil construction engineering, municipal transportation engineering, environmental protection engineering, petrochemical power engineering, ocean engineering and other waterproofing, seepage prevention and anticorrosion projects

 

 Construction Technology

* Base surface treatment: requires the base be clean, firm and without sharp protrusions

* Detailed structure treatment: the requirements of Yin Yang corner, construction joint, expansion joint, post pouring strip, pipe root and pile head shall be treated according to the design requirements.

* Large area spraying: spray construction should be completed by zone, 500-1000 square meters be a zone, can be sprayed continuously to the design thickness. When spraying, the direction of spraying should be changed alternately from top to bottom, and the next spraying cover about half width of upper spraying to ensure that the coating thickness is uniform and there is no leakage phenomenon.

* Film-forming maintenance: according to the ambient temperature, humidity, should be more than 24 hours of maintenance. During the maintenance period, no trample and no construction of the next step. Exhaust gas occurs during the period, and the blistering phenomenon of drainage is a normal phenomenon.

* Quality inspection: after the waterproof layer is finished, the appearance quality inspection should be done, and the detail structure should be checked, and the problems can be repaired in time to ensure that the coating waterproof layer has no leakage.

* Protective layer: after the construction of waterproof layer is completed, the protective layer construction should be carried out according to the design requirements. When the protective layer is constructed, the protective measures of finished product should be taken.

TS-906噴塗速凝橡膠演奏家清防水塗料.jpg

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x