logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-5B Flexible Polymer Cement Waterproofing Glue (Tupelin )

Product overview


Flexible polymer cement waterproofing glue is made of special polymer waterproof emulsion as main raw material and together with various auxiliaries. After mixing the emulsion with cement, a flexible waterproof layer with certain elasticity, strong adhesion, impermeability, weathering and good acid and alkali resistance can be formed by brushing on the base surface.

Order Hotline:400-6352-668


Advantages

* The operation is simple, easy to construct, impermeable and waterproof.

* It can be directly constructed on the dry external wall and wet base surface with strong bonding strength.

* Stable product performanceexcellent anti UV, weathering and aging resistance.

* Using ordinary cement as powder, the use cost is reduced.

 Application Range

* Seepage prevention and moisture-proof of the impervious surface of buildings, pools, external walls, bathrooms, waterproof and moisture-proof of the basements.

* Seepage prevention and moisture-proof for engineering of porous masonry material such as aerated concrete, hollow brick and so on.

 

 

Executive Standard  GB/T 23445-2009

 

Key points of construction

* The base surface should be smooth, clean, firm, no leakage, no water, uneven and cracks should be leveled, the yin-yang angle should be made into a circular arc.

* Proportion:

liquid : powder (cement)= 1:0.8 ( weight ratio )

* Construction: Add the powder(cement) slowly to the liquid, stir well until fine, then coating with roller or scraper, use the method of thin coating many times. 2mm thick coating is usually brushed 2-4 times, to be evenly brushed, not too thick, can not be brushed leakage, each process must wait until the coating is dry before it can be carried out.

* The bottom coating shall be repeated several times to ensure that no air bubbles are left between the coating and the base layer , and sufficient adhesion is required . If the protective layer is required , then after the last coating of waterproof layer is dried.

 

Storage & Packaging

* When storage and transportation, different products need to be classified. Prevent approaching fire sources, avoid sun and rain, and prevent collisions.

* The product should be stored in a cool and ventilated place with a storage temperature of 5-40, the powder should pay attention to moisture-proof.

* Under normal storage and transportation conditions, the storage period is 12 months from the date of production. If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection.

* Packing specifications:

  5kgs/bucket, 20kgs/bucket, 25kgs/bucket.

TS-5B 柔韌性聚合物(wù)水泥防水膠(塗必靈).png

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x