logo.jpg
EN 中(zhōng)文

24 hours Hotline

400-6352-668

TS-5 Polymer Cement Waterproofing Paint

Product overview

TS-5 is a bi-component waterproofing paint composed of organic polymer emulsion and inorganic powderits coating not only has the high strength elasticity of rubber material, but also the durability of inorganic material, it’s a green environmental protection product recommended by the Ministry of Construction.

Order Hotline:400-6352-668

Advantages

* Excellent waterproofing, impermeability and adhesion.

* Excellent anti UV, weathering and aging resistance.

* It can be directly applied on wet or dry concrete, metal, fiber tile, plate, masonry, asphalt,

polyurethane SBS, APP, etc.

* It can be used as exposed roof and drinking water engineering waterproof.

 

  Application Range

* Waterproofing of new and old buildings’roofs, basements, external walls, bathrooms, pools and so on.

* Coating waterproof for underground works, tunnels, bridges, etc.

* Type I is suitable for parts with large deformation. Type II & III is suitable for parts with small deformation.

 

Executive Standard GB/T 23445-2009

 

Key points of construction

* The base surface should be smooth, clean, firm, no leakage, no water, uneven and cracks should be leveled, the yin-yang angle should be made into a circular arc.

* Proportion:

Type I liquid : powder = 1:1.25 ( weight ratio )

Type II liquid :powder=1:1.55 (weight ratio)

Type III liquid :powder=1:2.27(weight ratio)

* Construction: Add the powder slowly to the liquid, stir well until fine, then coating with roller or scraper, use the method of thin coating many times. 2mm thick coating is usually brushed 2-4 times, to be evenly brushed, not too thick, can not be brushed leakage, each process must wait until the coating is dry before it can be carried out.

* The bottom coating shall be repeated several times to ensure that no air bubbles are left between the coating and the base layer , and sufficient adhesion is required . If the protective layer is required , then after the last coating of waterproof layer is dried.

 

Storage & Packaging

* When storage and transportation, different products need to be classified. Prevent approaching fire sources, avoid sun and rain, and prevent collisions.

* The product should be stored in a cool and ventilated place with a storage temperature of 5-40, the powder should pay attention to moisture-proof.

* Under normal storage and transportation conditions, the storage period is 12 months from the date of production. If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection.

* Packing specifications:

Item

  Packaging

  Liquid

    Powder

  Type I(1:1.25)

  45kgs/set

  20kgs/bucket

    25kgs/bag

Type II(1:1.55)

  41kgs/set

  16kgs/bucket

    25kgs/bag

  20kgs/set

   4kgs/bag*2

    6kgs/bag*2

  Type III (1:2.27)

  20kgs/set

   3.1kgs/bag*2

    6.9kgs*bag*2

 

TS-5 聚合物(wù)水泥防水塗料(JS 防水塗料).png

法律聲明

法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明法律聲明
x

隐私保護

隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護隐私保護
x
x